Ron Harris

Opti Eraser

6 posts in this topic

Optimum Opti-Eraser is an evolution of the clay bar! Use the dual-sided Opti-Eraser before waxing or sealing to safely remove bonded surface contamination. Will not mar when used according to directions. Available in Mild and Aggressive versions.

Directions:
1. Wash vehicle to remove loose dirt & debris with Optimum Car Wash or Optimum No Rinse
2. Using a sprayer, mist a small section of the vehicle with No Rinse Clay Bar Lube dilution or Opti-Clean
3. Gently work Opti-Eraser back and forth over the lubricated area until comtaminates are removed and surface is smooth adding more lubrication as needed
4. Remove excess lubricant with a paint safe Optimum Microfiber Towel.
5. Repeat in sections until entire vehicle is contaminate free.

Precautions:
*Inspect Opti-Eraser after each section and rinse as needed
*When too much contamination is present to wash clean, switch to a clean side or replace your Opti-Eraser
*Do NOT soak in liquid
*Do NOT squeeze or wring out
*Do NOT store flat on media surfaces (use sides)
*Do NOT store wet in air tight container

OE2012-500x500.jpg

Share this post


Link to post
Share on other sites

When will the light or fine version be available again for purchase?I have really have enjoyed using mine for close to a year now. Its finally starting to show its age a bit.

Share this post


Link to post
Share on other sites

*Inspect Opti-Eraser after each section and rinse as needed

rinse, as in dunk it in a bucket of water? or ONR? is it enough to spritz a clay lube dilution of ONR and wiping it with MF towel?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now