Jim Busch Posted August 29, 2016 Share Posted August 29, 2016 I had to clay this weekend as my car was covered with some kind of sticky residue from a freshly sealed street I live on. My car has been treated with Opti-Seal and OCW. After claying do i need to re-seal with opti-seal? In other words does claying strip opti-seal and OCW? I apologize if this has been asked before! Link to comment Share on other sites More sharing options...
Ron@Optimum Posted August 29, 2016 Share Posted August 29, 2016 This has been an ongoing topic on car care forums, does clay remove wax/sealants? In general is seems like clay should not remove wax, but because clay frequently introduces at least micro-marring requiring either polish or cleaner wax, and THAT removes your topping. Because either Spray Wax or Opti-Seal are so easy to apply, would be safe to re-coat. Link to comment Share on other sites More sharing options...
Jim Busch Posted August 29, 2016 Author Share Posted August 29, 2016 Thanks Ron. I'm going to polish, clean and re-seal. Link to comment Share on other sites More sharing options...
Ron@Optimum Posted August 30, 2016 Share Posted August 30, 2016 your safe bet Link to comment Share on other sites More sharing options...
The Guz Posted August 30, 2016 Share Posted August 30, 2016 If you haven't already done so, check out the rag company youtube channel. There is some good information provided by Yvan. Neat little trick the next time you clay. https://www.youtube.com/watch?v=vbKbNXqfnM8 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.