1 reply to this topic

[Steve O]

I would like to see a chart of mixing various products for use. Such as OID, 3pts water, 1pt concentrate. Keeping it simple and to the point.

But most importantly I would like to see the complete label to each product in PDF form for download or viewing. As formulations change or are upgraded it could be kept up to date real easy. Being able to read the label might answer a lot of questions.

Thanks for the great products.

[Chris Thomas]

Steve O, on Jun 13 2010, 08:17 PM, said:

I would like to see a chart of mixing various products for use. Such as OID, 3pts water, 1pt concentrate. Keeping it simple and to the point.

But most importantly I would like to see the complete label to each product in PDF form for download or viewing. As formulations change or are upgraded it could be kept up to date real easy. Being able to read the label might answer a lot of questions.

Thanks for the great products.

OID is 3:1 (add a bit more water if you see streaking, but make sure you aren't just applying it to hot paint before diluting more)

PowerClean is 3:1 for all surfaces, 1:1 or straight for degreasing (do not let dry on surface)

Optibond is 1:1 through sprayer or straight as a gel (diluting also produces more of a matte finish)

ONR is 1/2 oz per gallon unless you have hard water for wash, QD 8 oz per gallon, Clay lube 2 oz per gallon

Optimum Protectant Plus can be diluted 1:1 to make it more "sprayable."

The only labels that have changed to my knowledge is the recipe to make ONR a QD and that was probably just removed after Optimum came out with Instant Detailer. It can still be used as such though. I use a label maker to make a product name and ratio sticker that goes on top of the sprayer so I don't have to look it up during refillings.

If you need some that I haven't listed, just ask.