dnobel

MF cutting pad center compression

Recommended Posts

I recently performed a paint correction on the roof and trunk lid of a classic Prius using Hyper Compound and a pair of Optimum MF cutting pads. The pads were cleaned and rotated after completing each section. After the final cleaning up, I noticed that both of them are exhibiting signs of severe compression or failure of the center 3" of the foam core, so that they are now visibly concave.

 

The pads were brand new and installed on my GG6 DA; they were never run with the machine over 5. I cleaned them between sections using Mike Phillip's terry towel technique followed by the nylon pad cleaning brush, both with the machine set at 2. At the end of the job, I washed them under running water after spraying with Pinnacle XMT pad cleaner, then let them air dry on a Grit Guard.

 

Any idea what might have happened to them? My suspicion is that this is related to the cleaning process between sections, but I don't think I did anything improper or unusual.

Share this post


Link to post
Share on other sites

I would like to add pressure issue to the list of possible culprits.

Also, I've found that with MF pads, less section passes are needed for correction, as opposed to foam.

Furthermore, I rarely (actually, never) use cutting pads as OPT's finishing pads are sufficient for correction in every test spot that I've done. Even on hard CC.

Share this post


Link to post
Share on other sites

Thanks for all the replies!

 

Speed 5 may exceed our 5000 OPM recommendation, the GG6 transfers a ton of heat, and we're you using our backing plate?

 

Chris, you would be correct, as the GG6 set at 5 is apparently 6000 OPM. Where is your 5000 OPM spec published? I definitely missed that. And I have been using the LC backing plate, not yours. The only Opti-Flex I saw available on AG was the 7", obviously too big.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now