Brett Posted November 1, 2007 Share Posted November 1, 2007 I noticed on my OS bottle that it should be used between 55 and 90 degrees. My question is: Can it be used below 55 degrees? I am guessing it will increase drying time, etc? Just curious, as I would like to add coats over the winter. Thanks! Link to comment Share on other sites More sharing options...
Anthony Orosco Posted November 2, 2007 Share Posted November 2, 2007 Hey Brett, I had found that in my beta testing OS would streak more in cold weather BUT if you're in your garage and it's at least 50 degrees you should be just fine. Any streaking was taken care of with some extra buffing with a microfiber. So it works in colder weather but it just takes some extra care in application. Anthony Link to comment Share on other sites More sharing options...
dogma Posted November 10, 2007 Share Posted November 10, 2007 I have used OS in 20 degrees with no problem. My problem is I can't get it not to streak in any temp. its only minimal and wipes up easily with a MF ( won't stop me from using it ). Link to comment Share on other sites More sharing options...
Obsessive Detail Posted November 19, 2007 Share Posted November 19, 2007 I used OS last week when it was about 35 degrees and it still worked really well. It didn't dry as fast but there were no problems. Link to comment Share on other sites More sharing options...
ShowCar Posted January 9, 2008 Share Posted January 9, 2008 Ive used it in 30-50 degrees with no problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.